Author Topic: How to make a RHD fuel door release  (Read 5852 times)

0 Members and 1 Guest are viewing this topic.

Offline rbwdriven

  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 5493
  • Karma: 63

  • Activity
How to make a RHD fuel door release
« on: January 16, 2011, 02:08:59 pm »
I needed one since my LHD would not reach to my RHD Latch assembly.

What you will need is two things from Honda or your own car.

1.   hood release cable
2.   fuel door release cable.

First thing I did was take the old fuel door release assembly apart.

I also cut the end off the hood release cable (the end that mounts up to the latch)

Next I used map gas to remove the lead from the end of the fuel door release (round part metal)

Then I pulled the rest of the assembly apart.

Once I had all the parts that I needed I reversed the process with all the fuel door release stuff on to the hood release cable.

I used a blue butt connector as my stop.  I cut both ends off and used the correct length to go into the space needed.

Once together I put the spring and little button on.

Then slid the assembly together.

Pushed in place and functioni ng.


Related Topics

  Subject / Started by Replies Last post
37 Replies
Last post May 27, 2009, 11:01:34 pm
by S.Brewer
4 Replies
Last post July 29, 2009, 09:57:58 pm
by bubba50187
15 Replies
Last post November 10, 2009, 12:19:43 pm
by S.Brewer
16 Replies
Last post December 24, 2010, 08:11:12 pm
by EFSleeper
0 Replies
Last post June 15, 2011, 01:44:24 pm
by seph