Author Topic: ls/vtec swapped 1990 EFSI axles?  (Read 2817 times)

0 Members and 1 Guest are viewing this topic.

Offline ironhead808

  • n00b
  • Join Date: Apr 2011
  • Posts: 3
  • Karma: 0

  • Activity
    0%
ls/vtec swapped 1990 EFSI axles?
« on: April 04, 2011, 09:59:45 pm »
Hey everyone! I bought this setup off of a guy and did the install. Iv looked and looked all over google and have yet to find out what kind of axles go into my ls/vtec swap! I have a 1990 efsi b18a1 1999 si head with a Y1 tranny. My driver side axle is almost shot is vibrating the car like an earthquak e. I was told 90-93 integra axles and half shaft but i dont know. Thanks for any informati on you may have.

Offline bigdare23

  • Monarch
  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 3965
  • Karma: 65535
  • Mr. CRX

  • Activity
    0%
    • East Coast EF Civics
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #1 on: April 04, 2011, 10:23:30 pm »
Yep, use 90-93 integra axles.
-1988 CRX Si v2.0 coming soon

Offline darkintegra

  • n00b
  • Join Date: Feb 2011
  • Posts: 37
  • Karma: 0

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #2 on: April 04, 2011, 10:34:14 pm »
You have to use the axles according to the tranny you use.I know for a fact 90-93 axles are NOT the same.90-91 axles are smaller diameter than 92-93.They will bolt up and work but they will cause a tranny leak from the axle seal.You also have to match your hub and thats what Im trying to find out in my other thread.

Offline bigdare23

  • Monarch
  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 3965
  • Karma: 65535
  • Mr. CRX

  • Activity
    0%
    • East Coast EF Civics
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #3 on: April 05, 2011, 12:33:49 am »
All 90-93 5spd Integras share the same axles
-1988 CRX Si v2.0 coming soon

Offline Bus Driver J

  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 3536
  • Karma: 84

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #4 on: April 05, 2011, 12:58:47 pm »
All 90-01 Integra Pass side axles are the same.

You have to match the half shaft to the drivers axle.
Quote from: cbeengineering
trying to be cool by having a "ole skoo" car, I guess.


Offline darkintegra

  • n00b
  • Join Date: Feb 2011
  • Posts: 37
  • Karma: 0

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #5 on: April 05, 2011, 09:50:22 pm »
I have owned 4 da before going to an ef.i know from experienc e that 90-91 are different from 92-93.if you try putting 92 axles on a 91 ls tranny you are going to have a tranny leak.if you call honda they are going to give you different part numbers for the axle seals and axles for the years.the axles themselve s will work but will cause leak.

Offline bigdare23

  • Monarch
  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 3965
  • Karma: 65535
  • Mr. CRX

  • Activity
    0%
    • East Coast EF Civics
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #6 on: April 05, 2011, 11:28:22 pm »
44010-SK7-J73         DRIVESHAF T SET, R.
( May Have Been Discontin ued )    90 - 93    INTEGRA    408.82    306.62    

44011-SK7-J74         DRIVESHAF T SET, L.
( May Have Been Discontin ued )    90 - 93    INTEGRA    408.82    306.62    
-1988 CRX Si v2.0 coming soon

Offline EFSleeper

  • JDM Wannabe
  • *
  • Join Date: Jun 2010
  • Posts: 185
  • Karma: 1
  • Old Ass Car You Bought That Shit From Pull-A-Part

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #7 on: April 06, 2011, 12:35:58 am »
the auto axels are the same too i ran a set in my sedan for about 6 months with no problems.

Offline ironhead808

  • n00b
  • Join Date: Apr 2011
  • Posts: 3
  • Karma: 0

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #8 on: April 08, 2011, 07:47:50 pm »
Thanks for the informati on I bought Axles for a 1990 integra and they were the same ones I had on the car so I won't have any issues.

Offline rbwdriven

  • Administrator
  • Steppin' it up!
  • *****
  • Join Date: May 2009
  • Posts: 5489
  • Karma: 63

  • Activity
    0%
Re: ls/vtec swapped 1990 EFSI axles?
« Reply #9 on: April 08, 2011, 09:03:20 pm »
Lock topic?


 

Related Topics

  Subject / Started by Replies Last post
1 Replies
753 Views
Last post October 06, 2010, 06:44:29 am
by rbwdriven
2 Replies
1400 Views
Last post March 19, 2011, 04:25:49 pm
by EFJames
1 Replies
1252 Views
Last post April 05, 2011, 06:52:42 am
by rbwdriven
8 Replies
2293 Views
Last post April 21, 2012, 07:52:09 am
by rbwdriven
6 Replies
3389 Views
Last post March 26, 2013, 01:14:43 pm
by ultm8mind