Recent Posts

Pages: [1] 2 3 ... 10
Build Threads / Re: My 1991 si : b18c5 + jrsc + ats transmission + 5-lug
« Last post by rbwdriven on April 14, 2018, 08:22:48 am »
you might end up doing the following at a machine shop.

drill bigger hole
machine plug
put plug in hole
weld plug
drill and tap plug

A good machine/ fab shop could fix it but I would go lht first to see if they can fix it.
Build Threads / My 1991 si : b18c5 + jrsc + ats transmission + 5-lug
« Last post by Black R on April 13, 2018, 10:07:52 am »
I need someplace to archive this informati on.

Most recently I had to pull the blower for the 3rd or 4th time.

The LHT air to water cores were leaking into the port for cylinder #1 on the dyno.

Once pulled, I found that the manifold is cracked around two of the mounting points for the blower:

I have maybe 200 miles on this manifold since it was modded, but it's been a while since LHT did the work - so I've contacted them to see if they can help me out.


Yesterday my clutch pedal made a loud POP noise and dropped to the floor while I was driving and shifted into third gear...

I limped into a nearby neighborh ood to check / inspect on the side of the road.

Yup, broken clutch pedal assembly again!

This time, the shaft on the clutch pedal broke!

Well the repaired / braced assembly lasted me exactly two years...

A tow home, and several hours later; I have now installed a 90-91 pedal assembly.

(90-91 seems more sturdy fwiw, as the pedals in the car are oem 1988.
I'll donate when I get back to town.
Hi guys,

I'm sorry but I found out about this yesterday .

I don't know this EF owner directly, but my heart goes out to him:

I have a daughter myself and I drive her around in my EF a few times a week.

The thought of this happening is just too much...

I wanted to help donate some $ to the family, but there wasn't anything set up and people kept asking for the gofundme link.

I decided that I'd make a gofundme page, even though I've never done it before.

I know it looks like crap, but here it is:

I believe the dad and owners name is Coco,

and his brother is Ivan Rodriguez .

I hope it's ok to post something like this here, and I hope you will all share and donate.
Appearance & Cosmetic / Re: So I just ordered another set of headlight covers...
« Last post by rbwdriven on September 29, 2017, 07:10:16 pm »
nice.  any fitment issues?
Appearance & Cosmetic / So I just ordered another set of headlight covers...
« Last post by Black R on September 29, 2017, 01:07:03 pm »

Best price I could find online was from sfxperfor

P/n: GT0715C - for clear
P/n: GT0715S - for smoked

I currently have the smoked set above, so I ordered a clear set to try out as well.

I like these, because they make the headlight s and corner lamps look like one single integrate d unit. 
Off Topic / Re: Checking in
« Last post by rbwdriven on June 12, 2017, 08:58:59 pm »
Yep all got older.

Had kids etc.

I still own efs.

2 89 civic si's
1 88 crx si
1 91 wagon
1 89 civic si (EF3) RHD (Imported from the mother land)
Off Topic / Re: Checking in
« Last post by S.Brewer on June 12, 2017, 08:56:32 am »
Sad to see. I remember when this site was bangin
Pages: [1] 2 3 ... 10